top of page

ALL PRODUCTS

AUXILIARY
See our full product line of pods, rock lights, round lights, and more to fit any vehicle.

ACCESSORIES
Need an extra wiring harness or splitter hook up? Check out our accessories here.
Light Bars
LIGHTBARS

6" Single Row
Our 6” Pathfinder flood/spot single row light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

10" Single Row
Our 10” Pathfinder flood/spot single row light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

20" Single Row
Our 20” Pathfinder flood/spot single row light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

50" Single Row
Our 50” Pathfinder flood/spot single row light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

6" Double Row - Combo
Our 6” Pathfinder flood/spot combo light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

10" Double Row - Combo
Our 10” Pathfinder flood/spot combo light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
100w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
100w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

20" Double Row - Combo
Our 20” Pathfinder flood/spot combo light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications. Pair this light bar with our Nomad series bumpers for Mercedes Sprinter and Ford Transit vans; or our Brute series bumpers for Chevy, Ford, GMC, and RAM trucks for a superior off-road solution.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
200w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
200w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

20" SAE Double Row - Combo
Our 20” Pathfinder SAE LED combo light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
60w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

30" Double Row - Combo
Our 30” Pathfinder flood/spot combo light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
300w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
300w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

40" Double Row - Combo
Our 40” Pathfinder flood/spot combo light bar is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
400w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
400w
18,000 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

50" Curved Double Row - Combo
Our 50” Pathfinder curved flood/spot combo light bar is great for off-road applications and can provide a lighting solution for first responder vehicles and marine applications. This LED light bar is a perfect solution for your Chevy, Ford, GMC, RAM, and Toyota trucks or Mercedes Sprinter van.
Features:
More than 50,000 Hour Lifespan
9-36 V DC
500w
42,800 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
More than 50,000 Hour Lifespan
9-36 V DC
500w
42,800 Lumens
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Auxiliary Lights
AUXILIARY LIGHTS

9" PROWLR Driving Light - White
Our new insanely bright and efficient PROWLR lights not only look great, but they have the offroad protection and durability to back it up. Featuring a military grade breather, IP68/69 waterproof rating, GE Lexan Polycarbonate lenses, an aluminum housing, and a stainless steel mount. What makes our lights even better is we designed a special side shooter slot on each side, providing a wider beam than most traditional driving lights. Be more alert, see further, and be better prepared for what’s next on the trail with these White PROWLR lights.
CONTENTS:
One [1] Round LED Light
One [1] Wiring Harness Adaptor
One [1] mounting bracket
Hardware
Torx and Hex Tool
One [1] Instruction manual
FEATURES:
100% Optically Clear and Unbreakable LEXAN Lens
Instant On/Off, No Warm-up
Operating Temp:-40~+145 °C
Dual-Oversized Heat Sink
Low Power Consumption
Military Standard Breather
Waterproof DT Connector
Pass Testing: High Temperature, Low Temperature,High Pressure, Vibration, UV, Salt and Fog,Sand and Dust,
MODEL – 9” Round WHITE Light
POWER – 205W/Unit
LUX – 1Lux @438M/Unit
RAW LUMEN – 11058LM
WATERPROOF RATING – IP68/69K
CURRENT DRAW – 7A @13.2V
BEAM PATTERN – Combo/Wide Side Shooter
HOUSING MATERIAL – Aluminum 6063
LENS MATERIAL – GE Lexan Polycarbonate
MOUNT MATERIAL – Stainless Steel
INPUT VOLTAGE – 9-30V DC
LIFE SPAN – 50,000 Hours
Total height (with mount) is 9.61"
INSTRUCTIONS:
Disconnect the negative battery terminal on your vehicle battery.
Find a flat location to mount the light onto. Depending on where you decide to mount the light (bumper, roof rack, etc.), you may need to drill through the surface in order for the mounting bolts to properly secure the light.
After you’ve identified a mounting location, mount the light to the vehicle using at least 2 bolts per light. Using 1 bolt will not secure the light enough and may cause it to shift out of position offroad.
Use the supplied hardware and bolt down the light and bracket to the surface it’s being mounted to.
If you are wiring up a single light, plug the female end DT connector from the light into the male DT connector on the supplied wiring harness.
Neatly route the wires back to the engine bay or wherever you will get power.
Connect the black wire to the negative battery terminal and the red wire to the positive battery terminal.
Find a location to mount the auxiliary switch in your dash or wherever you want to access the switch.
If wiring a pair of lights to be used on 1 auxiliary switch, you will need a DT Connector 2-Way Splitter, which will accept both lights and utilize a single wiring harness.
After securing the positive and negative terminals to the battery, test the lights by switching on and off the auxiliary switch. If any problems occur, check the inline fuse on the wiring harness.
Next, wait until it is dark and park your vehicle on a level surface and turn the lights on so they project onto a wall.
Using the beam on the wall as a guide, losen the allen bolts on each side of the light bracket and adjust vertically as needed for an even, centrally aligned lighting position.
Once you are happy with the light beam position, tighten all bolts. Installation is complete.
Lights sold individually, NOT in pairs.
CONTENTS:
One [1] Round LED Light
One [1] Wiring Harness Adaptor
One [1] mounting bracket
Hardware
Torx and Hex Tool
One [1] Instruction manual
FEATURES:
100% Optically Clear and Unbreakable LEXAN Lens
Instant On/Off, No Warm-up
Operating Temp:-40~+145 °C
Dual-Oversized Heat Sink
Low Power Consumption
Military Standard Breather
Waterproof DT Connector
Pass Testing: High Temperature, Low Temperature,High Pressure, Vibration, UV, Salt and Fog,Sand and Dust,
MODEL – 9” Round WHITE Light
POWER – 205W/Unit
LUX – 1Lux @438M/Unit
RAW LUMEN – 11058LM
WATERPROOF RATING – IP68/69K
CURRENT DRAW – 7A @13.2V
BEAM PATTERN – Combo/Wide Side Shooter
HOUSING MATERIAL – Aluminum 6063
LENS MATERIAL – GE Lexan Polycarbonate
MOUNT MATERIAL – Stainless Steel
INPUT VOLTAGE – 9-30V DC
LIFE SPAN – 50,000 Hours
Total height (with mount) is 9.61"
INSTRUCTIONS:
Disconnect the negative battery terminal on your vehicle battery.
Find a flat location to mount the light onto. Depending on where you decide to mount the light (bumper, roof rack, etc.), you may need to drill through the surface in order for the mounting bolts to properly secure the light.
After you’ve identified a mounting location, mount the light to the vehicle using at least 2 bolts per light. Using 1 bolt will not secure the light enough and may cause it to shift out of position offroad.
Use the supplied hardware and bolt down the light and bracket to the surface it’s being mounted to.
If you are wiring up a single light, plug the female end DT connector from the light into the male DT connector on the supplied wiring harness.
Neatly route the wires back to the engine bay or wherever you will get power.
Connect the black wire to the negative battery terminal and the red wire to the positive battery terminal.
Find a location to mount the auxiliary switch in your dash or wherever you want to access the switch.
If wiring a pair of lights to be used on 1 auxiliary switch, you will need a DT Connector 2-Way Splitter, which will accept both lights and utilize a single wiring harness.
After securing the positive and negative terminals to the battery, test the lights by switching on and off the auxiliary switch. If any problems occur, check the inline fuse on the wiring harness.
Next, wait until it is dark and park your vehicle on a level surface and turn the lights on so they project onto a wall.
Using the beam on the wall as a guide, losen the allen bolts on each side of the light bracket and adjust vertically as needed for an even, centrally aligned lighting position.
Once you are happy with the light beam position, tighten all bolts. Installation is complete.
Lights sold individually, NOT in pairs.

9" PROWLR Driving Light - Amber
Our new insanely bright and efficient PROWLR lights not only look great, but they have the offroad protection and durability to back it up. Featuring a military grade breather, IP68/69 waterproof rating, GE Lexan Polycarbonate lenses, an aluminum housing, and a stainless steel mount. What makes our lights even better is we designed a special side shooter slot on each side, providing a wider beam than most traditional driving lights. Easily cut through rain, snow, dust, and fog with these bombproof plug-n-play Amber PROWLR lights.
CONTENTS:
One [1] Round LED Light
One [1] Wiring Harness Adaptor
One [1] mounting bracket
Hardware
Torx and Hex Tool
One [1] Instruction manual
FEATURES:
100% Optically Clear and Unbreakable LEXAN Lens
Instant On/Off, No Warm-up
Operating Temp:-40~+145 °C
Dual-Oversized Heat Sink
Low Power Consumption
Military Standard Breather
Waterproof DT Connector
Pass Testing: High Temperature, Low Temperature,High Pressure, Vibration, UV, Salt and Fog,Sand and Dust,
MODEL – 9” Round WHITE Light
POWER – 123W/Unit
LUX – 1Lux @263M/Unit
RAW LUMEN – 6638LM
WATERPROOF RATING – IP68/69K
CURRENT DRAW – 5A @13.2V
BEAM PATTERN – Combo/Wide Side Shooter
HOUSING MATERIAL – Aluminum 6063
LENS MATERIAL – GE Lexan Polycarbonate
MOUNT MATERIAL – Stainless Steel
INPUT VOLTAGE – 9-30V DC
LIFE SPAN – 50,000 Hours
Total height (with mount) is 9.61"
INSTRUCTIONS:
Disconnect the negative battery terminal on your vehicle battery.
Find a flat location to mount the light onto. Depending on where you decide to mount the light (bumper, roof rack, etc.), you may need to drill through the surface in order for the mounting bolts to properly secure the light.
After you’ve identified a mounting location, mount the light to the vehicle using at least 2 bolts per light. Using 1 bolt will not secure the light enough and may cause it to shift out of position offroad.
Use the supplied hardware and bolt down the light and bracket to the surface it’s being mounted to.
If you are wiring up a single light, plug the female end DT connector from the light into the male DT connector on the supplied wiring harness.
Neatly route the wires back to the engine bay or wherever you will get power.
Connect the black wire to the negative battery terminal and the red wire to the positive battery terminal.
Find a location to mount the auxiliary switch in your dash or wherever you want to access the switch.
If wiring a pair of lights to be used on 1 auxiliary switch, you will need a DT Connector 2-Way Splitter, which will accept both lights and utilize a single wiring harness.
After securing the positive and negative terminals to the battery, test the lights by switching on and off the auxiliary switch. If any problems occur, check the inline fuse on the wiring harness.
Next, wait until it is dark and park your vehicle on a level surface and turn the lights on so they project onto a wall.
Using the beam on the wall as a guide, losen the allen bolts on each side of the light bracket and adjust vertically as needed for an even, centrally aligned lighting position.
Once you are happy with the light beam position, tighten all bolts. Installation is complete.
Lights sold individually, NOT in pairs.
CONTENTS:
One [1] Round LED Light
One [1] Wiring Harness Adaptor
One [1] mounting bracket
Hardware
Torx and Hex Tool
One [1] Instruction manual
FEATURES:
100% Optically Clear and Unbreakable LEXAN Lens
Instant On/Off, No Warm-up
Operating Temp:-40~+145 °C
Dual-Oversized Heat Sink
Low Power Consumption
Military Standard Breather
Waterproof DT Connector
Pass Testing: High Temperature, Low Temperature,High Pressure, Vibration, UV, Salt and Fog,Sand and Dust,
MODEL – 9” Round WHITE Light
POWER – 123W/Unit
LUX – 1Lux @263M/Unit
RAW LUMEN – 6638LM
WATERPROOF RATING – IP68/69K
CURRENT DRAW – 5A @13.2V
BEAM PATTERN – Combo/Wide Side Shooter
HOUSING MATERIAL – Aluminum 6063
LENS MATERIAL – GE Lexan Polycarbonate
MOUNT MATERIAL – Stainless Steel
INPUT VOLTAGE – 9-30V DC
LIFE SPAN – 50,000 Hours
Total height (with mount) is 9.61"
INSTRUCTIONS:
Disconnect the negative battery terminal on your vehicle battery.
Find a flat location to mount the light onto. Depending on where you decide to mount the light (bumper, roof rack, etc.), you may need to drill through the surface in order for the mounting bolts to properly secure the light.
After you’ve identified a mounting location, mount the light to the vehicle using at least 2 bolts per light. Using 1 bolt will not secure the light enough and may cause it to shift out of position offroad.
Use the supplied hardware and bolt down the light and bracket to the surface it’s being mounted to.
If you are wiring up a single light, plug the female end DT connector from the light into the male DT connector on the supplied wiring harness.
Neatly route the wires back to the engine bay or wherever you will get power.
Connect the black wire to the negative battery terminal and the red wire to the positive battery terminal.
Find a location to mount the auxiliary switch in your dash or wherever you want to access the switch.
If wiring a pair of lights to be used on 1 auxiliary switch, you will need a DT Connector 2-Way Splitter, which will accept both lights and utilize a single wiring harness.
After securing the positive and negative terminals to the battery, test the lights by switching on and off the auxiliary switch. If any problems occur, check the inline fuse on the wiring harness.
Next, wait until it is dark and park your vehicle on a level surface and turn the lights on so they project onto a wall.
Using the beam on the wall as a guide, losen the allen bolts on each side of the light bracket and adjust vertically as needed for an even, centrally aligned lighting position.
Once you are happy with the light beam position, tighten all bolts. Installation is complete.
Lights sold individually, NOT in pairs.

LED Rock Lights (x8)
Our Pathfinder rock lights are great for off-road applications for night wheeling runs.
BLUETOOTH CAPABLE - COLOR ADJUSTABLE - 8 LIGHTS PER KIT.
Features:
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector
BLUETOOTH CAPABLE - COLOR ADJUSTABLE - 8 LIGHTS PER KIT.
Features:
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector

Flush Mount Scene Light
Our Pathfinder flush mount scene light is great for off-road applications and can also provide a lighting solution for power sports, first responder vehicles and marine applications.
Features:
20w
9-36V
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector
Features:
20w
9-36V
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector

Flush Mount Lights (Pair)
Our Pathfinder Flush Mount flood lights are great for off-road applications and can also provide a lighting solution for power sports, first responder vehicles and marine applications. Add the pair to our Nomad series rear bumpers for Mercedes Sprinter and Ford Transit vans; or our Brute series rear bumpers for Chevy, Ford, GMC, and RAM trucks for a superior off-road solution.
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector

2" Surface Mount Pod - Amber
Our Pathfinder Surface Mount amber lights are great for off-road applications and can also provide a lighting solution for power sports, first responder vehicles and marine applications. Along with our 20” Pathfinder Light Bar, add a pair to our Nomad series bumpers for Mercedes Sprinter and Ford Transit vans; or our Brute series bumpers for Chevy, Ford, GMC, and RAM trucks for a superior off-road solution.
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector

5x7" SAE Combo Light
Our 5" x 7" SAE combo light is great for off-road applications and can provide a lighting solution for power sports, first responder vehicles, and marine applications.
Features:
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector
Features:
High-Grade Aluminum Housing
GE LEXAN Lens with High Light Transmission
Military Breather Reduces Condensation
Dual-Oversized Heat Sink for Heat Dissipation.
IP68/IP69K Waterproofing
Easy Installation
Waterproof Deutsch Connector
Wiring Harness includes Switch and DT Connector

2" Surface Mount Pod - Spot
Our Pathfinder Surface Mount lights are great for off-road applications and can also provide a lighting solution for power sports, first responder vehicles and marine applications. Along with our 20” Pathfinder Light Bar, add the pair to our Nomad series bumpers for Mercedes Sprinter and Ford Transit vans; or our Brute series bumpers for Chevy, Ford, GMC, and RAM trucks for a superior off-road solution.
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector

2" Surface Mount Pod - Flood
Our Pathfinder Surface Mount lights are great for off-road applications and can also provide a lighting solution for power sports, first responder vehicles and marine applications. Along with our 20” Pathfinder Light Bar, add the pair to our Nomad series bumpers for Mercedes Sprinter and Ford Transit vans; or our Brute series bumpers for Chevy, Ford, GMC, and RAM trucks for a superior off-road solution.
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector
Features:
3,880 Lumens
Original Cree A Grade Chips
IP68/IP69K Waterproofing
Waterproof Deutsch Connector
UV Resistant Powder Coating & Lens
High-Grade Aluminum Housing
Military Breather Reduces Condensation
GE LEXAN Lens with High Light Transmission
Waterproof DEUTSCH connector
Wiring Harness includes Switch and DT Connector
Accessories
ACCESSORIES

8ft Wiring Harness Extension
This 8ft DT Connector Wiring Harness Extension is made for small light applications up to 30" light bars. If you are running a 40" or larger light bar, you will need our HD 8ft wiring harness extension.

HD 8ft Wiring Harness Extension
This 8ft DT Connector Wiring Harness Extension is made for 40" and 50" light bars. It is more substantial and insulated for larger amperage/current. If you are running a small light up to a 30" light bar, you will need our standard duty wiring extension.

DT Connector 2-Way Splitter
This DT style connector allows you to plug 2 separate auxiliary lights into a single wiring harness for a cleaner and simpler wiring setup.

DT Connector 4-Way Splitter
This DT style connector allows you to plug 4 separate auxiliary lights into a single wiring harness for a cleaner and simpler wiring setup.
bottom of page